HP 6125XLG R2306-HP 6125XLG Blade Switch IRF Configuration Guide - Page 44
Bind Ten-GigabitEthernet 3/1/7 and Ten-GigabitEthernet 3/1/8 to IRF-port 3/1.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
[Sysname-if-range-irf] quit [Sysname] save # Activate the IRF port configuration. [Sysname] irf-port-configuration active The two devices perform master election, and the one that has lost the election reboots to form an IRF fabric with the master. 3. Configure Device C: # Change the member ID of Device C to 3, and reboot the device to validate the change. system-view [Sysname] irf member 1 renumber 3 Renumbering the member ID may result in configuration change or loss. Continue? [Y/N]:y [Sysname] quit reboot # Connect Device C to Device A as shown in Figure 15, and log in to Device C. This example uses the SFP+ port group that contains Ten-GigabitEthernet 3/1/7, Ten-GigabitEthernet 3/1/8, Ten-GigabitEthernet 3/1/11, and Ten-GigabitEthernet 3/1/12 for IRF connection. # Shut down the physical ports. system-view [Sysname] interface range name irf interface ten-gigabitethernet 3/1/7 ten-gigabitethernet 3/1/8 ten-gigabitethernet 3/1/11 ten-gigabitethernet 3/1/12 [Sysname-if-range-irf] shutdown [Sysname-if-range-irf] quit # Bind Ten-GigabitEthernet 3/1/7 and Ten-GigabitEthernet 3/1/8 to IRF-port 3/1. [Sysname] irf-port 3/1 [Sysname-irf-port3/1] port group interface ten-gigabitethernet 3/1/7 [Sysname-irf-port3/1] port group interface ten-gigabitethernet 3/1/8 [Sysname-irf-port3/1] quit # Bind Ten-GigabitEthernet 3/1/11 and Ten-GigabitEthernet 3/1/12 to IRF-port 3/2. [Sysname] irf-port 3/2 [Sysname-irf-port3/2] port group interface ten-gigabitethernet 3/1/11 [Sysname-irf-port3/2] port group interface ten-gigabitethernet 3/1/12 [Sysname-irf-port3/2] quit # Bring up the SFP+ ports and save the configuration. [Sysname] interface range name irf [Sysname-if-range-irf] undo shutdown [Sysname-if-range-irf] quit [Sysname] save # Activate the IRF port configuration. [Sysname] irf-port-configuration active Device C reboots to join the IRF fabric. 4. Configure Device D: # Change the member ID of Device D to 4, and reboot the device to validate the change. system-view [Sysname] irf member 1 renumber 4 Renumbering the member ID may result in configuration change or loss. Continue? [Y/N]:y [Sysname] quit 40