HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 108
bfd echo-source-ip, Examples, Syntax, Default, Views, Predefined user roles, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Examples # Enable the echo packet mode on VLAN-interface 11. system-view [Sysname] interface vlan-interface 11 [Sysname-Vlan-interface11] bfd echo enable bfd echo-source-ip Use bfd echo-source-ip to configure the source IP address of BFD echo packets. Use undo bfd echo-source-ip to remove the configured source IP address of BFD echo packets. Syntax bfd echo-source-ip ip-address undo bfd echo-source-ip Default No source IP address is configured for BFD echo packets. Views System view Predefined user roles network-admin Parameters ip-address: Specifies the source IP address of BFD echo packets. Usage guidelines The source IP address cannot be on the same network segment as any local interface's IP address. Otherwise, a large number of ICMP redirect packets may be sent from the peer, resulting in link congestion. Examples # Configure the source IP address of BFD echo packets as 8.8.8.8. system-view [Sysname] bfd echo-source-ip 8.8.8.8 bfd echo-source-ipv6 Use bfd echo-source-ipv6 to configure the source IPv6 address of BFD echo packets. Use undo bfd echo-source-ipv6 to remove the configured source IPv6 address of BFD echo packets. Syntax bfd echo-source-ipv6 ipv6-address undo bfd echo-source-ipv6 Default No source IPv6 address is configured for BFD echo packets. 103