HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 53
display cfd mp, Syntax, Views, Predefined user roles, Parameters, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
display cfd mp Use display cfd mp to display the MP information. Syntax display cfd mp [ interface interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface interface-type interface-number: Displays the MP information on a port specified by its port type and port number. If this option is not specified, MP information on all ports is displayed. Usage guidelines The output is arranged by port name. On a port, the output shows MPs that serve VLANs, and then shows MPs that do not serve any VLANs. The MPs that serve VLANs are displayed in the ascending VLAN ID order. Within the same VLAN, the output is in the order of MIPs and MEPs (from high to low level). The MEPs that do not serve any VLANs are displayed by level (from high to low). Examples # Display the MP information on all ports. display cfd mp Interface Ten-GigabitEthernet1/1/5 VLAN 100 MIP Level: 2 Service instance: 102 Maintenance domain: md_2 Maintenance domain index: 3 Maintenance association: ma_2 Maintenance association index: 3 MEP ID: 101 Level: 1 Service instance: 101 Maintenance domain: md_1 Maintenance domain index: 2 Maintenance association: ma_1 Maintenance association index: 2 Direction: Inbound MEP ID: 100 Level: 0 Service instance: 100 Maintenance domain: md_0 Maintenance domain index: 1 Maintenance association: ma_0 Maintenance association index: 1 Direction: Outbound 48