HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 124
track interface protocol
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Related commands • display track • display ip interface brief (Layer 3-IP Services Command Reference) track interface protocol Use track interface protocol to create a track entry and associate it with the protocol state of a specific interface. Use undo track to remove the track entry. Syntax track track-entry-number interface interface-type interface-number protocol { ipv4 | ipv6 } [ delay { negative negative-time | positive positive-time } * ] undo track track-entry-number Default No track entry exists. Views System view Predefined user roles network-admin Parameters track-entry-number: Specifies the track entry ID in the range of 1 to 1024. interface-type interface-number: Specifies an interface by its type and number. ipv4: Monitors the IPv4 protocol state. When the IPv4 protocol state of an interface is up, the state of the track object is Positive. When the IPv4 protocol state of an interface is down, the state of the track object is Negative. To display the IPv4 protocol state of an interface, use the display ip interface brief command. ipv6: Monitors the IPv6 protocol state. When the IPv6 protocol state of an interface is up, the state of the track object is Positive. When the IPv6 protocol state of an interface is down, the state of the track object is Negative. To display the IPv6 protocol state of an interface, use the display ipv6 interface brief command. delay: Specifies the amount of time the Track module waits before notifying the application modules that the track entry state has changed. If you do not specify this keyword, the Track module notifies the application modules immediately when the track entry state changes. negative negative-time: Specifies the amount of time the Track module waits before notifying the application modules that the state of the track entry has changed to Negative. The negative-time argument represents the delay time in the range of 1 to 300 seconds. positive positive-time: Specifies the amount of time the Track module waits before notifying the application modules that the state of the track entry has changed to Positive. The positive-time argument represents the delay time in the range of 1 to 300 seconds. Usage guidelines After a track entry is created, you can only use the track interface protocol delay command to modify its notification delay settings. To modify other settings, you must delete the entry and create a new one. 119