HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 55
display cfd service-instance
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Field MAC Address State Time MAC Status Description MAC address of the remote MEP device. If this field is not supported, a hyphen (-) is displayed. Running state of the remote MEP, OK or FAILED. Time when the remote MEP entered the FAILED or OK state for the last time. State of the interface indicated by the last CCM received from the remote MEP: • UP-The interface is ready to pass packets. • DOWN-The interface cannot pass packets. • TESTING-The interface is in some test mode. • UNKNOWN-The interface status cannot be determined. • DORMANT-The interface is not in a state to pass packets. Instead, it is in a pending state, waiting for some external event. • NOT-PRESENT-Some component of the interface is missing. • LLD-The interface is down due to state of the lower layer interfaces. If this field is not supported, a hyphen (-) is displayed. display cfd service-instance Use display cfd service-instance to display the configuration information of service instances. Syntax display cfd service-instance [ instance-id ] Views Any view Predefined user roles network-admin network-operator Parameters instance-id: Service an instance ID in the range of 1 to 32767. If this argument is not specified, the configuration information of all service instances is displayed. Examples # Display the configuration information of all service instances. display cfd service-instance Service instances configured (2 in total): Service instance 5: Maintenance domain: md_5 Maintenance domain index: 5 Maintenance association: ma_5 Maintenance association index: 5 Level: 5 VLAN: 5 MIP rule: NONE CCM interval: 1s MEP ID: 730 Interface: Ten-GigabitEthernet1/1/5 Direction: Inbound 50