HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 43

cfd meplist

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

outbound: Creates an outward-facing MEP. Usage guidelines In creating a MEP, the service instance you specified defines the MD and MA to which the MEP belongs. You cannot create a MEP if the MEP ID is not included in the MEP list of the relevant service instance. Follow these guidelines when you use the command: • Configurations in Layer 2 Ethernet interface view take effect only on the current interface. • Configurations in Layer 2 aggregate interface view take effect on the aggregate interface and all its member ports. • Configurations on a member port take effect only when the member port leaves the aggregation group. Examples # Configure a MEP list in service instance 5, and create and enable inward-facing MEP 3 in service instance 5 on Ten-GigabitEthernet 1/1/5. system-view [Sysname] cfd md test_md level 3 [Sysname] cfd service-instance 5 ma-id vlan-based md test_md vlan 100 [Sysname] cfd meplist 3 service-instance 5 [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] cfd mep 3 service-instance 5 outbound Related commands cfd meplist cfd meplist Use cfd meplist to create a MEP list, a collection of local MEPs allowed to be configured and the remote MEPs to be monitored in the same MA. Use undo cfd meplist to delete existing MEP lists. Syntax cfd meplist mep-list service-instance instance-id undo cfd meplist mep-list service-instance instance-id Default No MEP list is created. Views System view Predefined user roles network-admin Parameters meplist mep-list: Specifies a list of MEP IDs, indicating multiple MEPs, in the format of mep-list = { mep-id [ to mep-id ] }&. The mep-id argument represents the MEP ID in the range of 1 to 8191. & indicates you can specify up to 10 MEP ID ranges. service-instance instance-id: Specifies the service instance ID in the range of 1 to 32767. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
38
outbound
: Creates an outward-facing MEP.
Usage guidelines
In creating a MEP, the service instance you specified defines the MD and MA to which the MEP belongs.
You cannot create a MEP if the MEP ID is not included in the MEP list of the relevant service instance.
Follow these guidelines when you use the command:
•
Configurations in Layer 2 Ethernet interface view take effect only on the current interface.
•
Configurations in Layer 2 aggregate interface view take effect on the aggregate interface and all
its member ports.
•
Configurations on a member port take effect only when the member port leaves the aggregation
group.
Examples
# Configure a MEP list in service instance 5, and create and enable inward-facing MEP 3 in service
instance 5 on Ten-GigabitEthernet 1/1/5.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd service-instance 5 ma-id vlan-based md test_md vlan 100
[Sysname] cfd meplist 3 service-instance 5
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] cfd mep 3 service-instance 5 outbound
Related commands
cfd meplist
cfd meplist
Use
cfd meplist
to create a MEP list, a collection of local MEPs allowed to be configured and the remote
MEPs to be monitored in the same MA.
Use
undo cfd meplist
to delete existing MEP lists.
Syntax
cfd meplist
mep-list
service-instance
instance-id
undo cfd meplist
mep-list
service-instance
instance-id
Default
No MEP list is created.
Views
System view
Predefined user roles
network-admin
Parameters
meplist
mep-list
: Specifies a list of MEP IDs, indicating multiple MEPs, in the format of
mep-list
= {
mep-id
[
to
mep-id
] }&<1-10>. The
mep-id
argument represents the MEP ID in the range of 1 to 8191.
&<1-10>
indicates you can specify up to 10 MEP ID ranges.
service-instance
instance-id
: Specifies the service instance ID in the range of 1 to 32767.