HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 6
Ethernet OAM commands, display oam
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Ethernet OAM commands display oam Use display oam to display the information about an Ethernet OAM connection, including connection status, information contained in Ethernet OAM packet header, and Ethernet OAM packet statistics. Syntax display oam { local | remote } [ interface interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters local: Displays the Ethernet OAM connection information of the local end. remote: Displays the Ethernet OAM connection information of the remote end. interface interface-type interface-number: Specifies a port by its type and number. Usage guidelines If you do not specify the interface keyword, this command displays information about all the Ethernet OAM connections. Examples # Display information about the Ethernet OAM connection established on all local ports. display oam local Ten-GigabitEthernet1/1/5 Enable status : Enable Loopback status : No loopback Link status : UP OAM mode : Active PDU : ANY Mux action : FWD Par action : FWD # Display information about the Ethernet OAM connection established on the local port Ten-GigabitEthernet 1/1/5. display oam local interface ten-gigabitethernet 1/1/5 Enable status : Enable Loopback status : No loopback Link status : UP OAM mode : Active PDU : ANY 1