Home » HP Manuals » Servers » HP 6125XLG » Manual Viewer

HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 93

You can use the, command to clear statistics for IPv6 VRRP groups.

Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

network-operator Parameters interface interface-type interface-number: Specifies an interface by its type and number. vrid virtual-router-id: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255. Usage guidelines If no interface or VRRP group is specified, this command displays statistics for all IPv6 VRRP groups. If only an interface is specified, this command displays statistics for all IPv6 VRRP groups on the specified interface. If both an interface and an IPv6 VRRP group are specified, this command displays statistics for the specified IPv6 VRRP group on the specified interface. You can use the reset vrrp ipv6 statistics command to clear statistics for IPv6 VRRP groups. Examples # Display statistics for all IPv6 VRRP groups when VRRP operates in standard mode. display vrrp ipv6 statistics Interface : Vlan-interface2 VRID : 1 CheckSum Errors : 0 Version Errors : 0 Invalid Pkts Rcvd : 0 Unexpected Pkts Rcvd : 0 Hop Limit Errors : 0 Advertisement Interval Errors : 0 Invalid Auth Type : 0 Auth Failures : 0 Packet Length Errors : 0 Auth Type Mismatch : 0 Become Master : 1 Address List Errors : 0 Adver Rcvd : 0 Priority Zero Pkts Rcvd : 0 Adver Sent : 425 Priority Zero Pkts Sent : 0 Global statistics CheckSum Errors : 0 Version Errors : 0 VRID Errors : 0 # Display statistics for all IPv6 VRRP groups when VRRP operates in load balancing mode. display vrrp ipv6 statistics Interface : Vlan-interface2 VRID : 1 CheckSum Errors : 0 Version Errors : 0 Invalid Pkts Rcvd : 0 Unexpected Pkts Rcvd : 0 Hop Limit Errors : 0 Advertisement Interval Errors : 0 Invalid Auth Type : 0 Auth Failures : 0 Packet Length Errors : 0 Auth Type Mismatch : 0 Become Master : 39 Address List Errors : 0 Become AVF : 13 Packet Option Errors : 0 Adver Rcvd : 2562 Priority Zero Pkts Rcvd : 1 Adver Sent : 16373 Priority Zero Pkts Sent : 49 Request Rcvd : 2 Reply Rcvd : 10 Request Sent : 12 Reply Sent : 2 Release Rcvd : 0 VF Priority Zero Pkts Rcvd : 1 Release Sent : 0 VF Priority Zero Pkts Sent : 11 88

Section	Page
Title Page	1
Contents	3
Ethernet OAM commands	6
display oam	6
display oam configuration	10
display oam critical-event	11
display oam link-event	12
oam enable	15
oam errored-frame threshold	15
oam errored-frame window	16
oam errored-frame-period threshold	17
oam errored-frame-period window	18
oam errored-frame-seconds threshold	18
oam errored-frame-seconds window	19
oam errored-symbol-period threshold	20
oam errored-symbol-period window	21
oam global errored-frame threshold	22
oam global errored-frame window	22
oam global errored-frame-period threshold	23
oam global errored-frame-period window	24
oam global errored-frame-seconds threshold	24
oam global errored-frame-seconds window	25
oam global errored-symbol-period threshold	26
oam global errored-symbol-period window	27
oam global timer hello	28
oam global timer keepalive	28
oam mode	29
oam remote-failure action	30
oam remote-loopback	31
oam remote-loopback interface	31
oam remote-loopback reject-request	32
oam timer hello	33
oam timer keepalive	34
reset oam	34
CFD commands	36
cfd cc enable	36
cfd cc interval	36
cfd enable	37
cfd linktrace	38
cfd linktrace auto-detection	39
cfd loopback	40
cfd md	41
cfd mep	42
cfd meplist	43
cfd mip-rule	44
cfd service-instance	45
display cfd linktrace-reply	46
display cfd linktrace-reply auto-detection	47
display cfd md	48
display cfd mep	49
display cfd meplist	52
display cfd mp	53
display cfd remote-mep	54
display cfd service-instance	55
display cfd status	56
DLDP commands	57
display dldp	57
display dldp statistics	58
dldp authentication-mode	60
dldp authentication-password	61
dldp delaydown-timer	62
dldp enable	62
dldp global enable	63
dldp interval	63
dldp unidirectional-shutdown	64
reset dldp statistics	65
VRRP commands	66
IPv4 VRRP commands	66
display vrrp	66
display vrrp statistics	72
reset vrrp statistics	75
vrrp check-ttl enable	76
vrrp mode	77
vrrp version	77
vrrp vrid authentication-mode	78
vrrp vrid preempt-mode	79
vrrp vrid priority	80
vrrp vrid shutdown	81
vrrp vrid timer advertise	82
vrrp vrid track	83
vrrp vrid virtual-ip	84
vrrp vrid weight track	85
IPv6 VRRP commands	86
display vrrp ipv6	86
display vrrp ipv6 statistics	92
reset vrrp ipv6 statistics	96
vrrp ipv6 mode	96
vrrp ipv6 vrid preempt-mode	97
vrrp ipv6 vrid priority	98
vrrp ipv6 vrid shutdown	99
vrrp ipv6 vrid timer advertise	99
vrrp ipv6 vrid track	100
vrrp ipv6 vrid virtual-ip	102
vrrp ipv6 vrid weight track	103
BFD commands	105
bfd authentication-mode	105
bfd demand enable	106
bfd detect-multiplier	106
bfd echo enable	107
bfd echo-source-ip	108
bfd echo-source-ipv6	108
bfd min-echo-receive-interval	109
bfd min-receive-interval	110
bfd min-transmit-interval	110
bfd multi-hop authentication-mode	111
bfd multi-hop destination-port	112
bfd multi-hop detect-multiplier	112
bfd multi-hop min-receive-interval	113
bfd multi-hop min-transmit-interval	114
bfd session init-mode	115
display bfd session	115
reset bfd session statistics	118
Track commands	119
display track	119
track bfd echo	121
track nqa	122
track interface	123
track interface protocol	124
Support and other resources	126
Contacting HP	126
Subscription service	126
Related information	126
Documents	126
Websites	126
Conventions	127
Command conventions	127
GUI conventions	127
Symbols	127
Network topology icons	128
Port numbering in examples	128

Match case Limit results 1 per page

network-operator

Parameters

interface

interface-type interface-number

: Specifies an interface by its type and number.

vrid

virtual-router-id

: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255.

Usage guidelines

If no interface or VRRP group is specified, this command displays statistics for all IPv6 VRRP groups. If

only an interface is specified, this command displays statistics for all IPv6 VRRP groups on the specified

interface. If both an interface and an IPv6 VRRP group are specified, this command displays statistics for

the specified IPv6 VRRP group on the specified interface.

You can use the

reset vrrp ipv6 statistics

command to clear statistics for IPv6 VRRP groups.

Examples

# Display statistics for all IPv6 VRRP groups when VRRP operates in standard mode.

<Sysname> display vrrp ipv6 statistics

Interface

: Vlan-interface2

VRID

: 1

CheckSum Errors

: 0

Version Errors

: 0

Invalid Pkts Rcvd

: 0

Unexpected Pkts Rcvd

: 0

Hop Limit Errors

: 0

Advertisement Interval Errors : 0

Invalid Auth Type

: 0

Auth Failures

: 0

Packet Length Errors

: 0

Auth Type Mismatch

: 0

Become Master

: 1

Address List Errors

: 0

Adver Rcvd

: 0

Priority Zero Pkts Rcvd

: 0

Adver Sent

: 425

Priority Zero Pkts Sent

: 0

Global statistics

CheckSum Errors

: 0

Version Errors

: 0

VRID Errors

: 0

# Display statistics for all IPv6 VRRP groups when VRRP operates in load balancing mode.

<Sysname> display vrrp ipv6 statistics

Interface

: Vlan-interface2

VRID

: 1

CheckSum Errors

: 0

Version Errors

: 0

Invalid Pkts Rcvd

: 0

Unexpected Pkts Rcvd

: 0

Hop Limit Errors

: 0

Advertisement Interval Errors : 0

Invalid Auth Type

: 0

Auth Failures

: 0

Packet Length Errors

: 0

Auth Type Mismatch

: 0

Become Master

: 39

Address List Errors

: 0

Become AVF

: 13

Packet Option Errors

: 0

Adver Rcvd

: 2562

Priority Zero Pkts Rcvd

: 1

Adver Sent

: 16373

Priority Zero Pkts Sent

: 49

Request Rcvd

: 2

Reply Rcvd

: 10

Request Sent

: 12

Reply Sent

: 2

Release Rcvd

: 0

VF Priority Zero Pkts Rcvd

: 1

Release Sent

: 0

VF Priority Zero Pkts Sent

: 11