HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 7
Table 1, Command output, Field, Description
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Mux action : FWD Par action : FWD Flags Link fault : Not occurred Dying gasp : Not occurred Critical event : Not occurred Local evaluating : COMPLETE Remote evaluating : COMPLETE Packets statistic Packet type Sent Received OAMPDU 100 80 OAMInformation 64 60 OAMEventNotification 36 20 OAMUniqueEventNotification 36 10 OAMDuplicateEventNotification 0 10 Table 1 Command output Field Ten-GigabitEthernet1/1/5 Enable status Loopback status Link status OAM mode PDU Mux action Par action Flags Description Information on Ten-GigabitEthernet 1/1/5. Ethernet OAM state (enabled or disabled). Ethernet OAM loopback state: • No loopback. • Remote loopback. • Local loopback. Link state (UP or DOWN). Local Ethernet OAM mode: • Active-The port operates in the active Ethernet OAM mode. • Passive-The port operates in the passive Ethernet OAM mode. The way in which the local end processes Ethernet OAMPDUs: • RX_INFO-The port only receives Information OAMPDUs and does not send any Ethernet OAMPDUs. • LF_INFO-The port only sends the Information OAMPDUs without Information TLV triplets and with their link error flag bits being set. • INFO-The port sends and receives only Information OAMPDUs. • ANY-The port sends and receives Ethernet OAMPDUs of any type. Operating mode of the local transmitter: • FWD-The port can send any packets. • DISCARD-The port only sends Ethernet OAMPDUs. Operating mode of the local receiver: • FWD-The port can receive any packets. • DISCARD-The port only receives Ethernet OAMPDUs. • LB-The local receiver is in loopback state. All the packets, other than Ethernet OAMPDUs, received on the local receiver are returned to their sources along their original routes. Local flags inserted in the local flag fields of the Ethernet OAMPDUs sent. 2