HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 110
bfd min-receive-interval
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
[Sysname-Vlan-interface11] bfd min-echo-receive-interval 500 bfd min-receive-interval Use bfd min-receive-interval to configure the minimum interval for receiving single-hop BFD control packets. Use undo bfd min-receive-interval to restore the default. Syntax bfd min-receive-interval value undo bfd min-receive-interval Default The minimum interval for receiving single-hop BFD control packets is 400 milliseconds. Views Interface view Predefined user roles network-admin Parameters value: Specifies the minimum interval for receiving single-hop BFD control packets, in milliseconds. The value range for this argument is 100 to 1000. Usage guidelines Configure this command to prevent the control packet sending rate of the peer end from exceeding the control packet receiving rate of the local end. The actual control packet sending interval of the peer end takes the greater value between the minimum interval for transmitting BFD control packets on the peer end and the minimum interval for receiving BFD control packets on the local end. Examples # Configure the minimum interval for receiving single-hop BFD control packets on VLAN-interface 11 as 500 milliseconds. system-view [Sysname] interface vlan-interface 11 [Sysname-Vlan-interface11] bfd min-receive-interval 500 bfd min-transmit-interval Use bfd min-transmit-interval to configure the minimum interval for transmitting single-hop BFD control packets. Use undo bfd min-transmit-interval to restore the default. Syntax bfd min-transmit-interval value undo bfd min-transmit-interval 105