HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 29
oam mode
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Default The global Ethernet OAM connection timeout timer is 5000 milliseconds. Views System view Predefined user roles network-admin Parameters interval: Specifies the Ethernet OAM connection timeout timer, in steps of 100 (in milliseconds). The value range for this argument is 1000 to 25000. Usage guidelines After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet OAM connections stable, HP recommends that you set the connection timeout timer at least five times the handshake packet transmission interval. The configuration in system view takes effect on all ports, but has a lower precedence than the configuration in interface view. Examples # Set the Ethernet OAM connection timeout timer to 6000 milliseconds. system-view [Sysname] oam global timer keepalive 6000 Related commands • display oam configuration • oam timer keepalive oam mode Use oam mode to set the Ethernet OAM mode. Use undo oam mode to restore the default. Syntax oam mode { active | passive } undo oam mode Default An Ethernet OAM-enabled Ethernet port operates in the active Ethernet OAM mode. Views Ethernet interface view Predefined user roles network-admin Parameters active: Specifies the active Ethernet OAM mode. 24