HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 85
vrrp vrid weight track
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
virtual-address: Specifies a virtual IP address, which cannot be an all-zero address (0.0.0.0); a broadcast address (255.255.255.255); a loopback address; an IP address of other than Class A, Class B, and Class C; or an invalid IP address (for example, 0.0.0.1). Usage guidelines You can assign up to 16 virtual IP addresses to an IPv4 VRRP group. If you create an IPv4 VRRP group but do not assign any virtual IP address to it, the VRRP group stays in inactive state and does not function. The virtual IP addresses of an IPv4 VRRP group must be in the same subnet as one of the IP addresses of the interface where the VRRP group is configured. Otherwise, the hosts in the subnet cannot access external networks. In load balancing mode, the virtual IP address of an IPv4 VRRP group cannot be the same as the IP address of any interface in the VRRP group. Otherwise, the load balancing mode cannot operate. Examples # Create IPv4 VRRP group 1 and assign virtual IP address 10.10.10.10 to the VRRP group. Then assign virtual IP address 10.10.10.11 to the VRRP group. system-view [Sysname] interface vlan-interface 2 [Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.10.10.10 [Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.10.10.11 Related commands display vrrp vrrp vrid weight track Use vrrp vrid weight track to configure the VFs in an IPv4 VRRP group to monitor a track entry in load balancing mode. When the state of the track entry transits to Negative, the weight values of all VFs in the VRRP group on the router decrease by a specific value. Use undo vrrp vrid weight track to remove the association between the VFs in an IPv4 VRRP group and a track entry. Syntax vrrp vrid virtual-router-id weight track track-entry-number [ reduced weight-reduced ] undo vrrp vrid virtual-router-id weight track [ track-entry-number ] Default The VFs of an IPv4 VRRP group are not associated with any track entry. Views Interface view Predefined user roles network-admin Parameters virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255. 80