HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 117
Table 32, Command output, IPv4/IPv6 BFD session mode
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Local Discr: 513 Remote Discr: 513 Source IP: FE80::20C:29FF:FED4:7171 Destination IP: FE80::20C:29FF:FE72:AC4D Session State: Up Interface: Vlan-interface11 Min Tx Inter: 500ms Act Tx Inter: 500ms Min Rx Inter: 500ms Detect Inter: 2500ms Rx Count: 38 Tx Count: 38 Connect Type: Direct Running Up for: 00:00:15 Hold Time: 2211ms Auth mode: None Detect Mode: Async Slot: 1 Protocol: OSPF6 Diag Info: No Diagnostic Table 32 Command output Field Total Session Num Up Session Num Init Mode Session Working Under Ctrl Mode Local Discr/LD Remote Discr/RD Source IP/SourceAddr Destination IP/DestAddr Session State/State Interface Min Tx Inter Min Rx Inter Act Tx Inter Detect Inter Rx Count Tx Count Hold Time/Holdtime Auth mode Connect Type Running up for Detect Mode Description Total number of BFD sessions. Total number of active BFD sessions. BFD operating mode, active or passive. IPv4/IPv6 BFD session mode: • Ctrl-Control packet mode. • Echo-Echo packet mode. Local ID of the session. Remote ID of the session. Source IP address of the session. Destination IP address of the session. Session state: up or down. Name of the interface of the session. Minimum transmit interval. Minimum receive interval. Actual transmit interval. Actual session detection timer. Number of packets received. Number of packets sent. Length of time before session detection timer expires. Session authentication mode (only simple is supported). Connection type of the interface, direct or indirect. Time interval for which the session has been up. Detection mode: • Async-Asynchronous mode. • Demand-Demand mode. 112