HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 57
DLDP commands, display dldp
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
DLDP commands display dldp Use display dldp to display DLDP configuration. Syntax display dldp [ interface interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface interface-type interface-number: Specifies an interface by its type and number. Usage guidelines If no port is specified, this command displays global and port-specific DLDP configuration. If a port is specified, this command displays only the DLDP configuration on the port. Examples # Display global and port-specific DLDP configuration. display dldp DLDP global status: Enabled DLDP advertisement interval: 5s DLDP authentication-mode: Simple DLDP authentication-password: ****** DLDP unidirectional-shutdown mode: Auto DLDP delaydown-timer value: 1s Number of enabled ports: 2 Interface Ten-GigabitEthernet1/1/5 DLDP port state: Bidirectional Number of the port's neighbors: 1 Neighbor MAC address: 0023-8956-3600 Neighbor port index: 79 Neighbor state: Confirmed Neighbor aged time: 13s Interface Ten-GigabitEthernet1/1/6 DLDP port state: Inactive Number of the port's neighbors: 0 (Maximum number ever detected: 1) # Display the DLDP configuration of Ten-GigabitEthernet 1/1/5. 52