HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 78
vrrp vrid authentication-mode, Default, Views, Predefined user roles, Parameters, Usage guidelines
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Default VRRPv3 is used. Views Interface view Predefined user roles network-admin Parameters version-number: Specifies a VRRP version. The version number is 2 or 3, where 2 indicates VRRPv2 (described in RFC 3768), and 3 indicates VRRPv3 (described in RFC 5798). Usage guidelines The version of VRRP on all routers in an IPv4 VRRP group must be the same. Examples # Specify VRRPv2 to run on VLAN-interface 10. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] vrrp version 2 vrrp vrid authentication-mode Use vrrp vrid authentication-mode to configure the authentication mode and the authentication key for an IPv4 VRRP group to send and receive VRRP packets. Use undo vrrp vrid authentication-mode to restore the default. Syntax vrrp vrid virtual-router-id authentication-mode { md5 | simple } { cipher | plain } key undo vrrp vrid virtual-router-id authentication-mode Default Authentication is disabled when a VRRP group sends and receives VRRP packets. Views Interface view Predefined user roles network-admin Parameters virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255. md5: Specifies the MD5 authentication mode. simple: Specifies the simple authentication mode. cipher: Sets a ciphertext authentication key. plain: Sets a plaintext authentication key. 73