HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 111
bfd multi-hop authentication-mode
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Default The minimum interval for transmitting single-hop BFD control packets is 400 milliseconds. Views Interface view Predefined user roles network-admin Parameters value: Specifies the minimum interval for transmitting single-hop BFD control packets, in milliseconds. The value range for this argument is 100 to 1000. Usage guidelines Use this command to make sure that the BFD packet sending rate does not exceed the device capability. The actual BFD control packet transmitting interval on the local end is the greater value between the minimum interval for transmitting BFD control packets on the local end and the minimum interval for receiving BFD control packets on the peer end. Examples # Configure the minimum interval for transmitting single-hop BFD control packets on VLAN-interface 11 as 500 milliseconds. system-view [Sysname] interface vlan-interface 11 [Sysname-Vlan-interface11] bfd min-transmit-interval 500 bfd multi-hop authentication-mode Use bfd multi-hop authentication-mode to configure the authentication mode for multi-hop BFD control packets. Use undo bfd multi-hop authentication-mode to restore the default. Syntax bfd multi-hop authentication-mode simple key-id { cipher cipher-string | plain plain-string } undo bfd multi-hop authentication-mode Default No authentication is performed. Views System view Predefined user roles network-admin Parameters simple: Specifies the simple authentication mode. key-id: Sets the authentication key ID in the range of 1 to 255. cipher: Sets a ciphertext password. cipher-string: Sets the ciphertext password, which is a case-sensitive string of 33 to 53 characters. 106