HP 6125XLG R2306-HP 6125XLG Blade Switch High Availability Command Reference - Page 34
oam timer keepalive, reset oam
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
[Sysname-Ten-GigabitEthernet1/1/5] oam timer hello 600 Related commands • display oam configuration • oam global timer hello oam timer keepalive Use oam timer keepalive to configure the Ethernet OAM connection timeout timer. Use undo oam timer keepalive to restore the default. Syntax oam timer keepalive interval undo oam timer keepalive Default The port uses the global setting. Views Ethernet interface view Predefined user roles network-admin Parameters interval: Specifies the Ethernet OAM connection timeout timer, in steps of 100 (in milliseconds). The value range for this argument is 1000 to 25000. Usage guidelines After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet OAM connections stable, HP recommends that you set the connection timeout timer at least five times the handshake packet transmission interval. The configuration in interface view takes effect on the specified port. For a port, the configuration in interface view takes precedence. Examples # Set the Ethernet OAM connection timeout timer to 6000 milliseconds. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] oam timer keepalive 6000 Related commands • display oam configuration • oam global timer keepalive reset oam Use reset oam to clear the statistics on Ethernet OAM packets and Ethernet OAM link error events of an Ethernet port. 29