HP 6127 HP Deskjet 6120 Series printers - (English) Macintosh User's Guide - Page 183

ethernet glossary, MAC address Media Access Control address

Page 183 highlights

ethernet glossary 10/100 Base-T: A technical term for "ethernet." 10/100 refers to the speed at which the ethernet network functions. 10 indicates 10 megabits per second (Mb/s) for normal Ethernet, and 100 indicates 100 Mb/s for Fast Ethernet. AutoIP: A process by which a device on a network automatically assigns IP addresses to itself. Broadcast packet: A packet sent from one device on a network to all devices on the network. DHCP (Dynamic Host Configuration Protocol): A protocol used to automatically assign an IP address to each device on a network. Ethernet: A popular form of wired computer networking for Local Area Networks. Ethernet cable: There are two types of ethernet cables. A straight-through cable is the most common and is used to connect devices on a network to a hub or router. A crossover cable is a twisted pair patch cable the routes the transmit signals from one device to the receive signals of another device. Use an unshielded CAT-5 straightthrough cable with an RJ-45 plug to connect the printer to an ethernet network. Gateway: A dedicated device (router or computer) that connects two different networks. For example, a computer on an ethernet network may act as a gateway between a network and the Internet. Firewall: A combination of hardware and software that protects a network from unwanted entry. Hub: A simple device that acts as the center of an ethernet network. Other devices on the network are connected to the hub. IP address (Internet Protocol address): A unique number that identifies a device on a LAN. The IP address is often automatically assigned by DHCP or AutoIP. However, a device can be manually assigned a static IP address. LAN (Local Area Network): A high-speed type of computer network that connects devices that are a relatively short distance from one another. Ethernet is one type of LAN. MAC address (Media Access Control address): The hardware address for a device on a network. The printer's MAC address appears on the network configuration page and on the label near the printer's ethernet port. Mb/s (megabits per second): The measure for the rate at which an ethernet network functions. For example, 1 Mb/s equals 1,000,000 bits per second (or 125,000 bytes per second). 183

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190

ethernet glossary
10/100 Base-T
: A technical term for "ethernet." 10/100 refers to the speed at which
the ethernet network functions. 10 indicates 10 megabits per second (
Mb/s
) for normal
Ethernet, and 100 indicates 100
Mb/s
for Fast Ethernet.
AutoIP
: A process by which a device on a network automatically assigns
IP addresses
to itself.
Broadcast packet
: A
packet
sent from one device on a network to all devices on the
network.
DHCP (Dynamic Host Configuration Protocol)
: A
protocol
used to automatically
assign an IP address to each device on a network.
Ethernet
: A popular form of wired computer networking for
Local Area Networks
.
Ethernet cable
: There are two types of ethernet cables. A straight-through cable is the
most common and is used to connect devices on a network to a
hub
or
router
. A
crossover cable is a twisted pair patch cable the routes the transmit signals from one
device to the receive signals of another device. Use an unshielded CAT-5 straight-
through cable with an
RJ-45
plug to connect the printer to an ethernet network.
Gateway
: A dedicated device (
router
or computer) that connects two different
networks. For example, a computer on an ethernet network may act as a gateway
between a network and the Internet.
Firewall
: A combination of hardware and software that protects a network from
unwanted entry.
Hub
: A simple device that acts as the center of an ethernet network. Other devices on
the network are connected to the hub.
IP address (Internet Protocol address)
: A unique number that identifies a device on
a LAN. The IP address is often automatically assigned by
DHCP
or
AutoIP
. However, a
device can be manually assigned a
static IP address
.
LAN (Local Area Network)
: A high-speed type of computer network that connects
devices that are a relatively short distance from one another. Ethernet is one type of
LAN.
MAC address (Media Access Control address)
: The hardware address for a device
on a network. The printer's MAC address appears on the network configuration page and
on the label near the printer's ethernet port.
Mb/s (megabits per second)
: The measure for the rate at which an ethernet network
functions. For example, 1 Mb/s equals 1,000,000 bits per second (or 125,000 bytes per
second).
183