HP 6840 HP Deskjet 6800 Printer series - (Windows/Macintosh) Network Guide - Page 59
Resetting the printer to factory default, settings
UPC - 829160429724
View all HP 6840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
English Resetting the printer to factory default settings Resetting the printer to the factory default settings clears all the settings from the printer memory for your network. This should only be done as a last resort when troubleshooting the printer. Resetting the printer to the factory default settings may require you to reinstall the printer software. Additionally, you will also have to reconfigure the printer security settings. The printer default settings are: Option Communication mode Network name (SSID) Encryption IP address Wireless radio EWS administrator password Default setting Ad hoc hpsetup None Automatic On [blank] Follow these steps to reset the printer to the factory default settings: 1. Verify that the printer is powered on. 2. Press and hold down the Report Page button. 3. While holding down the Report Page button, press the Cancel button three times. 4. Release the Report Page button. 57