HP Brio ba410 hp brio ba410 pcs, hp kayak xm600 series 2 pcs, e-Diagtools 3.01 - Page 44
Basic SCSI HDD functionality, SCSI tests will be done.
View all HP Brio ba410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5 e-Diagtools Basic System Test What is Tested ❒ SCSI hard disk drive, to check the basic functioning of any SCSI hard disk drives: • Basic SCSI HDD functionality ❒ Keyboard tests: • Keyboard controller • Keyboard clock line • Keyboard data line ❒ Basic video features ❒ USB test ❒ Other tests: • Basic serial port test (does not include data transfer - this is an advanced test) • Basic parallel port test (does not include actual printing - this is an advanced test) • LAN and Audio tests Each test listed above is performed only if it is appropriate for your PC's configuration. For example, if your PC does not have a SCSI controller, or no SCSI hard disk is connected to the SCSI controller, no SCSI tests will be done. Furthermore, a component test will only be performed if the component was correctly detected in the hardware detection phase. For example, if you have recently installed an IDE hard disk drive and it was not detected during the hardware detection phase, the hard disk drive will not be tested. (For more information about hardware detection, refer to page 19.) NOTE e-Diagtools does not test components that have not been detected. However, we recommend that you run the basic system test to verify that the underlying components are functioning correctly. English 31