HP Brio ba410 hp brio ba410 pcs, hp kayak xm600 series 2 pcs, e-Diagtools 3.01 - Page 88
h – 03FFh:Floppy Disk Error Codes, Ensure that the floppy disk is fully inserted in
View all HP Brio ba410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Appendix A e-Diagtools Error Codes 0300h - 03FFh :Floppy Disk Error Codes 0300h - 03FFh: Floppy Disk Error Codes Code 0301h 0302h 0303h 0304h 0305h 0306h 0307h Explanation Details/Parts to Check The status register of the floppy disk controller does not reflect the correct status. Floppy disk controller error. Install new system board. Cannot send command to the floppy disk Floppy disk controller error. controller. Install new system board. The floppy disk controller does not generate interrupt correctly. Floppy disk controller error. Install new system board. The DMA functionality of the floppy disk Floppy disk controller error. controller is not correct. Install new system board. Floppy disk format test failed. Run floppy disk controller test. Ensure that the floppy disk is fully inserted in the drive Check your floppy disk drive is installed correctly. Replace the floppy disk. If error persists, install new floppy disk drive. Floppy disk drive speed error. Check your floppy disk drive is installed correctly. If error persists, install new floppy disk drive. Floppy disk sequential read test failed. Run floppy disk controller test. Ensure that the floppy disk is fully inserted in the drive Check your floppy disk drive is installed correctly. Replace the floppy disk. If error persists, install new floppy disk drive. English 75