HP C3982A User Manual - Page 120
Envelopes
![]() |
View all HP C3982A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Envelopes You can print many types of envelopes from Tray 1. Printing performance varies depending on the construction of the envelope. It is important to test a sample envelope before purchasing a large quantity. To reduce envelope curl use the rear output tray. Caution Never use envelopes with clasps, snaps, windows, coated linings, exposed self-stick adhesives, or other synthetic materials. These items can severely damage your printer. Never try to print on both sides of an envelope. Jamming and printer damage can result. Before you load envelopes in Tray 1, check to make sure they are regular in shape and undamaged. Also, check to see that the envelopes are not stuck together. Envelope Construction Envelope construction is very critical. Envelope fold lines can vary considerably, not only between manufacturers but also within a box from the same manufacturer. Successful printing on envelopes is very dependent upon the quality of the media. • Weight: The weight of the envelope paper should not exceed 28 lb (105 g/m2) or jamming may result. • Construction: Prior to printing, envelopes should lie flat with less than 0.25 in (6 mm) curl. • Manufacture: Make sure envelopes are not wrinkled, nicked, or otherwise damaged. • Sizes: Use only envelopes within the following sizes in Tray 1: • Minimum: 3 x 5 in (76 mm x 127 mm) • Maximum: 8.5 x 14 in (216 mm x 356 mm) Media B Specifications EN Media Specifications B-7
![](/manual_guide/products/hewlettpackard-c3982a-user-manual-305954a/120.png)