HP C3982A User Manual - Page 95
Troubleshooting Macintosh Problems
![]() |
View all HP C3982A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Troubleshooting Macintosh Problems Solving Problems in the Chooser • Printer driver icon does not appear in the Chooser. Reinstall the printer software. See software installation instructions beginning on page 1-13. • Printer name does not appear in the "Select an HP LaserJet Printer" box in the Chooser or list box. • Make sure the cables are connected correctly, the printer is on, and the Ready (front) light is on. • Make sure the printer cable is connected to the computer's printer port. • Make sure the correct printer driver has been selected in the Chooser. • If the printer resides on a network with multiple zones, make sure the correct zone is selected in the "AppleTalk Zones" box in the Chooser. • Make sure the printer has been chosen in the Chooser by printing a self test. (Simultaneously press [Go] and [Job[Cancel].) Check the name of the printer displayed on the self test page. • Make sure the AppleTalk is on. (The button next to Active is selected in the Chooser.) • Make sure you are using a high-quality cable. • Make sure the printer is on the correct network. Select the Network control panel from Control Panels in the Apple menu and then choose the correct network. • The printer driver does not automatically set up your selected printer even though you clicked Auto Setup in the Chooser. (This is a non-GX-environment.) 1 Reinstall the printer software. (See software installation instructions beginning on page 1-13.) 2 Select an alternate PPD. (See page 5-20.) 3 Your PPD may have been renamed. If so, select the renamed PPD. (See page 5-20.) 5-18 Problem Solving EN
![](/manual_guide/products/hewlettpackard-c3982a-user-manual-305954a/95.png)