HP C3982A User Manual - Page 63
Printing on Envelopes
![]() |
View all HP C3982A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Printing on Envelopes Before you load envelopes in Tray 1, make sure they are undamaged and are not stuck together. Caution Never use envelopes with clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials. See Appendix B for media specifications. 1 Grasp Tray 1 by the two finger tabs and pull the top down. Pull out the plastic tray extender with the center finger tab. 2 Open the rear output tray by grasping the center finger tab and pulling the top down. Pull out the tray extender until it snaps into place. (This reduces envelope curling.) 3 Place envelopes against the left side of the tray, print-side up, with the postage-end in. Slide the envelopes into the printer as far as they will go without forcing them. 4 Slide the paper width guide to the left until it lightly touches the right side of the envelope stack. 5 Make sure the envelopes fit under the plastic tabs on the paper width guide and the left side of the tray. 3-12 Printing Tasks EN
![](/manual_guide/products/hewlettpackard-c3982a-user-manual-305954a/63.png)