HP CP4005n HP Color LaserJet CP4005 - User Guide - Page 193
Stop At Out, Replace Fuser Kit - order transfer kit less than
UPC - 882780717046
View all HP CP4005n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Control panel message PRINT CARTRIDGES To exit press. Stop Remove at least one print cartridge. To exit press. Stop REPLACE [COLOR] CARTRIDGE The supplies gauge will display the consumption levels of print cartridges. alternates with The supplies gauge will display the consumption levels of print cartridges. REPLACE FUSER KIT For help press REPLACE FUSER KIT For help press alternates with REPLACE FUSER KIT Description Recommended action The printer is executing a disable cartridge check or component test where the component selected is the cartridge motor. Remove one print cartridge. The identified print cartridge has reached the 1. end of life and the COLOR SUPPLY OUT setting in the SYSTEM SETUP menu is set 2. to STOP AT OUT. Printing can continue. 3. Order the appropriate print cartridge. To continue, press . Open the front and top covers and then open the image transfer unit. CAUTION The image transfer unit can be easily damaged. 4. Remove the identified print cartridge. 5. Install a new print cartridge. 6. Close the image transfer unit and the top and front covers. 7. Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information. The fuser kit has reached the end of its life. 1. Open the top cover. Replace the fuser kit. Printing can continue although print quality might be reduced. 2. Grasp the purple handles on the fuser unit. 3. Remove the old fuser unit from the printer. 4. Install a new fuser unit and secure with thumb screws. 5. Close the top cover. 6. Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information. The fuser is nearing the end of its useful life 1. Order the fuser kit. and the REPLACE SUPPLIES setting in the SYSTEM SETUP menu is set to STOP 2. To continue printing, press . AT OUT. Printing can continue. 3. To replace the fuser kit, perform the following steps: ● Open the top cover. ● Grasp the purple handles on the fuser unit. ENWW Control panel messages 177