HP CP4005n HP Color LaserJet CP4005 - User Guide - Page 99
Configuring input trays, Configuring trays when the printer gives a prompt - color laserjet cp4005 duplex printing
UPC - 882780717046
View all HP CP4005n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Configuring input trays The printer allows you to configure input trays by type and size. You can load different media in the printer's input trays and then request media by type or size using the control panel. NOTE If you have used other HP LaserJet printer models, you might be accustomed to configuring Tray 1 to First mode or Cassette mode. On HP Color LaserJet CP4005 Series printers, setting the Tray 1 size and type to ANY SIZE is equivalent to First mode. Setting the size or type for Tray 1 to a setting other than ANY SIZE is equivalent to Cassette mode. NOTE If you are duplex printing, be sure that the media loaded meets the specifications for duplex printing. (See Supported media weights and sizes.) NOTE The instructions below are to configure the trays at the printer control panel. You can also configure the trays from your computer by accessing the embedded Web server. See Using the embedded Web server. Configuring trays when the printer gives a prompt In the following situations, the printer automatically prompts you to configure the tray for type and size: ● When you load paper into the tray ● When you specify a particular tray or media type for a print job through the printer driver or a software application and the tray is not configured to match the print job settings The control panel displays the message LOAD TRAY X [TYPE] [SIZE], To change type press . The instructions below explain how to configure the tray after the prompt appears. NOTE The prompt does not appear if you are printing from Tray 1 and if Tray 1 is configured for ANY SIZE and ANY TYPE. Configuring a tray when loading paper NOTE If media is loaded in optional Tray 3 when the printer is in sleep mode, the printer will not sense new media when it comes out of sleep mode. This could cause the printer to use wrong paper for a print job. Be sure to wake the printer before loading media in optional Tray 3. 1. Load paper in the tray. If you are using Tray 2 or optional Tray 3, close the tray. 2. The printer displays the tray configuration message To change size press . 3. Press to display the TRAY X SIZE= menu. 4. To change the size, press or to highlight the correct size. 5. Press to select the size. A Setting saved message appears, and then a prompt appears to configure the paper type. 6. To change the type, press or to highlight the correct paper type. 7. Press to select the paper type. ENWW Configuring input trays 83