HP LH4r HP Netserver LP 2000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 104
Using the Setup Screens, Changing the System Date and Time, Enter, Return, User Preferences
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Chapter 10 Configuring the HP Netserver o Embedded LAN Controllers - Enable or disable the embedded LAN controllers and the available features. The Alert-On-LAN 2 (AOL2) and Wake-on-LAN features are enabled/disabled under the embedded LAN A submenu. o Boot Device Ordering - Set the boot order, including bootable boards. • Exit - Exit the Setup Utility by saving changes or exit without saving changes, which reverts to previous settings. When you exit, the HP Netserver reboots. Using the Setup Screens Online help explains the settings displayed on the Setup Utility screens. Instructions are also provided for navigating between the screens and entering or changing the setup data. • Press the right-arrow and left-arrow keys to move between selections on the menu bar. The menu bar is present at the top of the main selections. • Press the up-arrow and down-arrow keys to move between fields on each screen. The currently-selected field will be highlighted. • Certain fields ask you to choose from a list of entries. In such cases, press the plus (+) or minus (-) keys repeatedly to display each possible entry, or the Enter (or Return) key to choose from a pop-up menu. • Small arrow points (➢) precede some field names. This means the field is actually a submenu. To visit the submenu, select it with the arrow keys and press the Enter key. The submenu then appears in place of the current screen. • The Esc key is the exit key. If you press the Esc key on one of the top-level screens, the Exit menu appears. If you press Esc on a submenu, the previous screen appears. When you are making selections from a pop-up menu, use the Esc key to close the pop-up without making a selection. Changing the System Date and Time Use this topic to change the HP Netserver's date and time and refer to the following procedure. 1. To reach the Setup Utility, boot or reboot the system and press F2 when prompted. 2. If necessary, use the left-arrow key to select User Preferences from the menu bar at the top of the screen. 98