HP LH4r HP Netserver LP 2000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 81
Rack Mounting the HP Netserver (2-Post), Introduction, CPI - Chatsworth Products Inc. rack.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
8 Rack Mounting the HP Netserver (2-Post) Introduction This chapter provides instructions for mounting the HP Netserver in a two-post non-HP rack. The illustration below shows the characteristics of the 2-post (CPI - Chatsworth Products Inc.) rack. If you have the 4-post HP System/E or System/U rack, or a third-party 4-post rack, see Chapter 7, "Rack Mounting the HP Netserver (4-Post)," for instructions. If you have the older 4-post HP systems rack, see Chapter 13, "Alternative Rack Mounting." If you want to install the HP Netserver in a third-party rack not covered in this guide, you may find relevant documentation on HP's web site at the following URL: http://www.hp.com/netserver/support 75
75
8
Rack Mounting the HP Netserver
(2-Post)
Introduction
This chapter provides instructions for mounting the HP Netserver in a two-post
non-HP rack. The illustration below shows the characteristics of the 2-post
(CPI – Chatsworth Products Inc.) rack.
If you have the 4-post HP System/E or System/U rack, or a third-party 4-post rack,
see Chapter 7, "Rack Mounting the HP Netserver (4-Post)," for instructions.
If you have the older 4-post HP systems rack, see Chapter 13, "Alternative Rack
Mounting." If you want to install the HP Netserver in a third-party rack not
covered in this guide, you may find relevant documentation on HP's web site at the
following URL: