HP LH4r HP Netserver LP 2000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 52
See Inserting a PCI Card
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 5 Installing Additional Boards Figure 5-5. Inserting a PCI Card 9. When you have completed the PCI card installation, replace the PCI card cage and reconnect the card cage fan to the system board: a. Align the PCI card cage with the guides on the and left side of the chassis. Lower the PCI card cage and plug the fan into the connector on the system board. See Figure 5-6. b. Press down on the top of the card cage to plug the riser card into the motherboard. c. Make sure that the front edge of the PCI card cage is seated on the guide pin. See Figure 5-6. 46
Chapter 5
Installing Additional Boards
46
Figure 5-5. Inserting a PCI Card
9. When you have completed the PCI card installation, replace the PCI card cage
and reconnect the card cage fan to the system board:
a.
Align the PCI card cage with the guides on the and left side of the chassis.
Lower the PCI card cage and plug the fan into the connector on the system
board. See Figure 5-6.
b. Press down on the top of the card cage to plug the riser card into the
motherboard.
c.
Make sure that the front edge of the PCI card cage is seated on the guide
pin.
See Figure 5-6.