HP LH4r HP Netserver LP 2000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 64
Removing a Processor and Heatsink, See Opening and Closing the HP
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 6 Installing an Additional Processor Removing a Processor and Heatsink Use this procedure to remove a processor and its heatsink (the heatsink must be removed before the processor). CAUTION Take the following precautions when removing processors: • Wear an anti-static wrist strap and use a static-dissipating work surface or grounding mat connected to the chassis when handling components. • Before removing the processor, touch a grounded unpainted metal surface on the HP Netserver to discharge static electricity. 1. Remove the air flow guide. See Chapter 2, "Opening and Closing the HP Netserver." 2. Use a flathead screwdriver or similar tool to unhook the tool latch on the heatsink. See Figure 6-6. Tool Latch Figure 6-6. Removing the Heatsink 58