HP LH4r HP Netserver LP 2000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 79
Attach the Cable Management Arm to the HP Netserver, See
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 7 Rack Mounting the HP Netserver (4-Post) 3. Attach the Cable Management Arm to the HP Netserver: a. Insert the thumbscrew on the inner flange of the Cable Management Arm into the hole in the chassis slide mount. b. Tighten the thumbscrew to secure the Cable Management Arm. See Figure 7-8. 4. Extend the HP Netserver out of the rack to ensure the Cable Management Arm moves with the chassis without binding. 5. Dress the cables in the Cable Management Arm, and then slide the HP Netserver into the rack to verify that the cables do not bind in the tray. 73
Chapter 7
Rack Mounting the HP Netserver (4-Post)
73
3. Attach the Cable Management Arm to the HP Netserver:
a.
Insert the thumbscrew on the inner flange of the Cable Management Arm
into the hole in the chassis slide mount.
b. Tighten the thumbscrew to secure the Cable Management Arm.
See Figure 7-8.
4. Extend the HP Netserver out of the rack to ensure the Cable Management
Arm moves with the chassis without binding.
5. Dress the cables in the Cable Management Arm, and then slide the HP
Netserver into the rack to verify that the cables do not bind in the tray.