HP LH4r HP Netserver LP 2000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 67
Rack Mounting the HP Netserver (4-Post), Introduction
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
7 Rack Mounting the HP Netserver (4-Post) Introduction This chapter provides instructions for mounting the HP Netserver in 4-post HP System/E or System/U racks (shown in Figure 7-1) and third-party non-threaded 4-post racks. If you have the older 4-post HP Systems rack, see Chapter 13, "Alternative Rack Mounting (4-Post)," for instructions. If you have a 2-post non-HP rack, see Chapter 8, "Rack Mounting the HP Netserver (2-Post)," or refer to the documentation in the appropriate rack accessory kit. If you want to install the HP Netserver in a third-party rack not covered in this guide, you may find relevant documentation on HP's web site at the following URL: http://www.hp.com/netserver/support 61
61
7
Rack Mounting the HP Netserver
(4-Post)
Introduction
This chapter provides instructions for mounting the HP Netserver in 4-post HP
System/E or System/U racks (shown in Figure 7-1) and third-party non-threaded
4-post racks.
If you have the older 4-post HP Systems rack, see Chapter 13,
"Alternative Rack Mounting (4-Post)," for instructions.
If you have a 2-post
non-HP rack, see Chapter 8, "Rack Mounting the HP Netserver (2-Post)," or refer
to the documentation in the appropriate rack accessory kit. If you want to install
the HP Netserver in a third-party rack not covered in this guide, you may find
relevant documentation on HP's web site at the following URL: