HP LH4r HP Netserver LP 2000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 58
CAUTION, Ensure the metal of the wrist strap contacts your skin.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 6 Installing an Additional Processor 6. Ensure the processor speed of the second processor (CPU 2) is the same as the primary processor. If you are upgrading the second processor to a faster processor speed than the primary processor, the primary processor must also be changed. Both processors must have the same product number, which includes the same clock speed, cache size, and FSB speed. The supported processors only perform at the rated speed indicated on the processor in the HP Netserver. CAUTION Always wear a wrist strap and use a static-dissipating work surface connected to the chassis when handling components. Ensure the metal of the wrist strap contacts your skin. 7. Open the ZIF (Zero Insertion Force) lever. Then lift the terminator out of the socket and place it on anti-static surface or container. See Figure 6-2. To open the ZIF lever, pull the lever out away from the ZIF socket and raise it 90° to the system board. 52