HP LaserJet 4v/mv HP LaserJet 4V and 4MV Printer - User’s Guide, C314 - Page 108
The printer cannot produce a self-test printout, Display messages reappear or cannot be removed
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
The printer cannot produce a self-test printout Situation Solution Printer is not off line. Press [On Line] to place the printer off line (the printer control panel should display 00 OFFLINE). Toner cartridge sealing tape Remove sealing tape from toner cartridge. See the Getting Started not removed. Guide or the installation guide that came with your toner cartridge. Paper Cassette not correctly installed or out of paper. Push the Paper Cassette firmly into printer (add paper if necessary). front cover is open. Firmly close the front cover. Paper is jammed in the printer. Check for paper jams (see "Clearing Paper Jams" in this chapter). Messages appear in the display. Review the messages for help (see "Understanding Printer Messages" in this chapter). If no error messages appear but the self test still does not print, call for assistance. Display messages reappear or cannot be removed Message Solution 10 RESET TO SAVE continues to appear. If there is data in the printer's buffer when you change control panel menu items, the 10 RESET TO SAVE message will appear. See 10 RESET TO SAVE in the "Understanding Printer Messages" section of this chapter for information on how to clear this message. 16 TONER LOW See "Clearing the TONER LOW Message" in Chapter 7. MP LOAD LEGAL or similar messages persist, requesting that you load media. Clear the printer's buffer by performing a reset ([Shift] + [Reset]). W- ------ (clearable warnings) are frequently displayed. See "Clearable Warnings" in the "Understanding Printer Messages" section of this chapter. 18 MIO NOT READY If the printer MIO card is operating correctly and communicating with the network, this message will disappear after approximately one minute and no action is required. If the MIO card is unable to communicate with the network, this message will remain for five minutes and the go away. In this case the printer is not communicating with the network (even though the message is no longer present). The problem may be a bad MIO card, bad cable/connection on the network, or a network problem. Contact your network administrator. Solving Printer Problems 8-3