HP LaserJet 4v/mv HP LaserJet 4V and 4MV Printer - User’s Guide, C314 - Page 45

Printing Tasks

Get HP LaserJet 4v/mv PDF manuals and user guides View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

B. If your software allows for it, also set the 3 bottom margin. Take the maximum paper length size 17.7 inches, subtract 6 inches (the length of the card). The bottom margin equals 11.7 inches. Note The edge of the paper feeding into the printer must be at least 3.9 inches (100 mm) to allow rollers inside the printer to grab the paper. Side edges must be at least 5.8 in (148 mm). 4 3 Open the MP Tray by grasping the door on the front of the printer, at the pattern of raised dots on each side. Pull the tray down gently until it stops. 4 Pull out the tray extension if needed for the paper size you are printing. 5 Place paper in the tray between the paper width guides, with the side-to-be-printed 5 down. Adjust the paper width guides to lightly touch both edges of the paper, without bending. Remember to adjust the paper stop guide on the output bin of the printer (see Figure 3-3). Send the document to the printer. 3-16 Printing Tasks

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
B.
If your software allows for it, also set the
bottom margin. Take the maximum paper
length size 17.7 inches, subtract 6 inches (the
length of the card). The bottom margin equals
11.7 inches.
Note
The edge of the paper feeding into the printer
must be at least 3.9 inches (100 mm) to allow
rollers inside the printer to grab the paper.
Side edges must be at least 5.8 in (148 mm).
3
Open the MP Tray by grasping the door
on the front of the printer, at the pattern
of raised dots on each side.
Pull the tray down gently until it stops.
4
Pull out the tray extension if needed for
the paper size you are printing.
5
Place paper in the tray between the paper
width guides, with the side-to-be-printed
down.
Adjust the paper width guides to lightly
touch both edges of the paper, without
bending.
Remember to adjust the paper stop guide
on the output bin of the printer (see
Figure 3-3).
Send the document to the printer.
4
3
5
3-16 Printing Tasks