HP LaserJet 4v/mv HP LaserJet 4V and 4MV Printer - User’s Guide, C314 - Page 41
Manually Feeding s from the MP
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Note Manually Feeding Pages from the MP Tray On rare occasions (when printing transparencies, for instance), you may want the printer to stop after each page. Usually, you select Manual Feed through your software. However, if it is not available you can set MANUAL FEED=ON in the Printing Menu of the printer's control panel. To manually print a single sheet of paper with software: 1 Make sure the MP Tray is empty. 2 In your software application's print setup, set Paper Source to Manual Feed or complete the procedure below. The paper source you select in your software application overrides the control panel setting. To manually feed paper, be sure you select Manual Feed in your software application's print setup. 3 Send the document to the printer. The printer goes off-line. The control panel displays the message, MF FEED LETTER, if you choose Letter size paper. 4 Place the sheet of paper into the MP Tray with the side-to-be-printed down. Move the paper width guides to lightly touch the edges of the paper. The printer automatically pulls the sheet of paper into the printer. To select Manual Feed from the control panel: 1 Press [On Line] to take the printer off line. 2 Press [Menu] once to reach PRINTING MENU. 3 Press [Item] until MANUAL FEED=setting appears. 4 Press [+/-] once to reach MANUAL FEED=ON. 5 Press [Enter] to save your selection. 6 Press [On Line] to put the printer back on line. 3-12 Printing Tasks