HP M1522nf HP LaserJet M1522 MFP Series User Guide - Page 53
Con the network product, View settings, Network configuration Configuration
UPC - 883585238880
View all HP M1522nf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Configure the network product View settings Network configuration page The network configuration page lists the current settings and properties of the product network card. To print the network configuration page from the product, complete the following steps. 1. On the control panel, press Setup ( ). 2. Use the arrow buttons to select Reports, and then press OK. 3. Use the arrow buttons to select Network report, and then press OK. Configuration page The configuration page lists the current settings and properties of the product. You can print a configuration page from the product or HP ToolboxFX. To print the configuration page from the product, complete the following steps. 1. On the control panel, press Setup ( ). 2. Use the arrow buttons to select Reports, and then press OK. 3. Use the arrow buttons to select Config report, and then press OK. A second page also prints. On that page, the Fax Settings and Imaging Settings sections provide details about the product fax settings (fax models only). Change settings You can use the embedded Web server (EWS) or HP ToolboxFX to view or change the IP configuration settings. To gain access to the embedded Web server, type the product IP address in the address line of a Web browser. You can view HP ToolboxFX when the product is directly connected to a computer or when it is connected to the network. You must perform a complete software installation to use HP ToolboxFX. Open HP ToolboxFX in one of these ways: ● In the Windows system tray, double-click the HP ToolboxFX icon. ● On the Windows Start menu, click Programs (or All Programs in Windows XP), click HP, click the product name, and then click HP ToolboxFX. In HP ToolboxFX, click the Network Settings tab. From the Networking tab (EWS) or the Network Settings tab (HP ToolboxFX), you can change the following configurations: ● Host Name ● Manual IP Address ● Manual Subnet Mask ● Manual Default Gateway ENWW Configure the network product 41