HP Pro 3330 HP Pro 3330 Microtower PC, HP Pro 3330 Small Form Factor PC, and H - Page 179
Solving Printer Problems, If you encounter printer problems
View all HP Pro 3330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Computer appears to be locked up while recording audio. Cause Solution The hard disk may be full. Before recording, make sure there is enough free space on the hard disk. You can also try recording the audio file in a compressed format. Line-in jack is not functioning properly. Cause Solution Jack has been reconfigured in the audio driver or application In the audio driver or application software, reconfigure the software. jack or set the jack to its default value. There is no sound or sound volume is too low. Cause The application is set to use a different audio device than speakers. Some applications can select which audio output device is used. The operating system controls may be set to use a different audio device as the default output device than what is expected. Solution Some graphics cards support audio over the DisplayPort connection, so multiple audio devices may be listed in Device Manager. Make sure the correct device is being used. Make sure the application has selected the correct audio device. Set the operating system to use the correct audio device. Solving Printer Problems If you encounter printer problems, see the documentation that came with the printer and to the common causes and solutions listed in the following table. Table D-8 Solving Printer Problems Printer will not print. Cause Printer is not turned on and online. The correct printer drivers for the application are not installed. If you are on a network, you may not have made the connection to the printer. Printer may have failed. Solution Turn the printer on and make sure it is online. 1. Install the correct printer driver for the application. 2. Try printing using the MS-DOS command: DIR C:\ > [printer port] where [printer port] is the address of the printer being used. If the printer works, reload the printer driver. Make the proper network connections to the printer. Run printer self-test. Solving Printer Problems 169