HP Pro 3330 HP Pro 3330 Microtower PC, HP Pro 3330 Small Form Factor PC, and H - Page 86
Removing the power switch assembly
View all HP Pro 3330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
8. Press the tab on the top of the switch holder (1) to disengage it from the chassis, lift the switch upward to disengage the tab at the bottom of the switch (2) from the chassis, and then pull the power switch away from the chassis while guiding the wires through the hole in the chassis. Figure 7-34 Removing the power switch assembly To install the power switch/LED assembly, reverse the removal procedures. 76 Chapter 7 Removal and Replacement Procedures - Microtower (MT) Chassis
8.
Press the tab on the top of the switch holder
(1)
to disengage it from the chassis, lift the switch
upward to disengage the tab at the bottom of the switch
(2)
from the chassis, and then pull the
power switch away from the chassis while guiding the wires through the hole in the chassis.
Figure 7-34
Removing the power switch assembly
To install the power switch/LED assembly, reverse the removal procedures.
76
Chapter 7
Removal and Replacement Procedures – Microtower (MT) Chassis