HP Pro 3330 HP Pro 3330 Microtower PC, HP Pro 3330 Small Form Factor PC, and H - Page 23
Computer Setup-Security continued
View all HP Pro 3330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Table 3-4 Computer Setup-Security (continued) USB Security Allows you to set Enabled/Disabled (default is Enabled) for: ● Front USB Ports ◦ USB Port 3 ◦ USB Port 4 ● Rear USB Ports ◦ USB Port 8 ◦ USB Port 9 ◦ USB Port 10 ◦ USB Port 11 ● Internal USB Ports ◦ USB Port 1 ◦ USB Port 2 NOTE: The HP Pro 3330/3380 includes a USB port disable feature that when enabled, requires that you perform the following steps to enable USB ports. From the top F10 Setup menu, press Ctrl+U to access the screen to allow you to enable the ports. Slot Security Allows you to disable any PCI Express x16, PCI Express x1, or PCI slots Default is enabled. Network Boot Enables/disables the computer's ability to boot from an operating system installed on a network server. (Feature available on NIC models only; the network controller must be either a PCI expansion card or embedded on the system board.) Default is enabled. Computer Setup (F10) Utilities 13