HP ProLiant DL185 HP ProLiant DL185 Generation 5 Server Software Configuration - Page 12
IDE Configuration submenu
View all HP ProLiant DL185 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
IDE Configuration submenu Figure 7 IDE Configuration submenu Table 6 IDE Configuration submenu fields Field Description Options Onboard PCI IDE Controller Set this value to allow the computer system to detect the Primary and Both Secondary IDE channels. This includes the Primary Master, Primary Slave, Secondary Master, and Secondary Slave. Set this value to allow the computer system to detect only the Primary Primary IDE channel. This includes both the Primary Master and the Primary Slave. Set this value to prevent the computer system from using the onboard Disabled IDE controller. Set this value to allow the computer system to detect only the Secondary IDE channel. This includes both the Secondary Master and the Secondary Slave. Secondary Hard Disk Write Protect Set this value to allow the hard disk drive to be used normally. Read, write, and erase functions can be performed to the hard disk drive. This is the default setting. Disabled Set this value to prevent the hard disk drive from being erased. Enabled IDE Detect Time Out(Seconds) This value is the best setting to use if the onboard IDE controllers are 0 set to a specific IDE disk drive in the BIOS Set this value to stop the setup from searching the IDE bus for IDE 5 disk drives in 5 seconds. Set this value to stop the setup from searching the IDE bus for IDE 10 disk drives in 10 seconds Set this value to stop the setup from searching the IDE bus for IDE 15 disk drives in 15 seconds System BIOS configuration 12