HP ProLiant DL185 HP ProLiant DL185 Generation 5 Server Software Configuration - Page 13
SuperIO Configuration submenu, Field, Description, Options
View all HP ProLiant DL185 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Table 6 IDE Configuration submenu fields Field Description Set this value to stop the setup from searching the IDE bus for IDE disk drives in 20 seconds Set this value to stop the setup from searching the IDE bus for IDE disk drives in 25 seconds Set this value to stop the setup from searching the IDE bus for IDE disk drives in 30 seconds 35 is the default value. It is the recommended setting when all IDE connectors are set to AUTO in the setup setting Options 20 25 30 35 SuperIO Configuration submenu Figure 8 SuperIO Configuration submenu Table 7 SuperIO Configuration submenu fields Option Disabled 3F8/IRQ4 3E8/IRQ4 Description Set this value to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port physically becomes unavailable Set this value to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. This is the default setting. The majority of serial port 1 or COM1 ports on computer systems use IRQ4 and I/O Port 3F8 as the standard setting. The most common serial device connected to this port is a mouse. If the system will not use a serial device, it is best to set this port to Disabled. Set this value to allow the serial port to use 3E8 as its I/O port address and IRQ 4 for the interrupt address. If the system will not use a serial device, it is best to set this port to Disabled. System BIOS configuration 13