HP ProLiant DL185 HP ProLiant DL185 Generation 5 Server Software Configuration - Page 35

Table 22 Beep codes and checkpoint codes Code 54h 55h 56h 57h 58h 59h 5Ah 5Bh 5Ch 5Eh 60h 62h 64h 66h 67h 68h 69h 6Ah 6Bh 6Ch 70h 72h 74h 76h 7Ah 7Ch 7Dh 7Eh 80h 81h 82h 83h Beep code 2-2-3-1 Description Set key click if enabled Enable USB devices Enable keyboard Enable FireWire devices Test for unexpected interrupts Initialize POST display service Display prompt "Press F10 to enter SETUP" Disable processor cache Test RAM between 512 and 640 KB Test base memory Test extended memory Test extended memory address lines Jump to user patch 1 Configure advanced cache registers Initialize multiprocessor APIC Enable external and processor caches Setup System Management Mode (SMM) area Display external L2 cache size Load custom defaults (optional) Display shadow-area message Display error messages Check for configuration errors Test real-time clock Check for keyboard errors Check for key lock errors Set up hardware interrupt vectors Initialize Intelligent System Monitoring Initialize coprocessor if present Disable onboard super I/O ports and IRQs Late POST device initialization Detect and install external RS232 ports Configure non-MCD IDE controllers System BIOS configuration 35