HP ProLiant DL388e HP ProLiant DL388e Gen8 Server User Guide - Page 22
Remove the air baffle, Install the air baffle
View all HP ProLiant DL388e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2. Push down on the hood latch. The access panel slides to a closed position. 3. Use the T-15 Torx screwdriver provided with the server to tighten the security screw on the hood latch. Remove the air baffle CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open. 1. Power down the server (on page 18). 2. Remove all power: a. Disconnect each power cord from the power source. b. Disconnect each power cord from the server. 3. Do one of the following: o Extend the server from the rack (on page 18). o Remove the server from the rack (on page 20). 4. Remove the access panel (on page 21). 5. Remove the air baffle. Install the air baffle CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open. Operations 22