HP ProLiant DL388e HP ProLiant DL388e Gen8 Server User Guide - Page 31
Identifying the contents of the server shipping carton, Installing hardware options, Installing
View all HP ProLiant DL388e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
WARNING: When installing a server in a telco rack, be sure that the rack frame is adequately secured at the top and bottom to the building structure. Identifying the contents of the server shipping carton Unpack the server shipping carton and locate the materials and documentation necessary for installing the server. All the rack mounting hardware necessary for installing the server into the rack is included with the rack or the server. The contents of the server shipping carton include: • Server • Power cord • Printed setup documentation, documentation CD, and software products • Rack mounting hardware kit and documentation (optional) In addition to these supplied items, you might need: • T-10/T-15 Torx screwdriver • T-25 Torx screwdriver (for the screws located inside the server quick-release levers) • Hardware options • Operating system or application software Installing hardware options Install any hardware options before initializing the server. For options installation information, see the option documentation. For server-specific information, see "Hardware options installation (on page 34)." Installing the server into the rack To install the server into a rack with square, round, or threaded holes, refer to the instructions that ship with the rack hardware kit. If you are installing the server into a telco rack, order the appropriate option kit at the RackSolutions.com website (http://www.racksolutions.com/hp). Follow the server-specific instructions on the website to install the rack brackets. WARNING: This server is very heavy. To reduce the risk of personal injury or damage to the equipment: • Observe local occupational health and safety requirements and guidelines for manual material handling. • Get help to lift and stabilize the product during installation or removal, especially when the product is not fastened to the rails. HP recommends that a minimum of two people are required for all rack server installations. A third person may be required to help align the server if the server is installed higher than chest level. • Use caution when installing the server in or removing the server from the rack; it is unstable when not fastened to the rails. Setup 31