HP ProLiant DL388e HP ProLiant DL388e Gen8 Server User Guide - Page 44

cable to the drive backplane.

Get HP ProLiant DL388e PDF manuals and user guides View all HP ProLiant DL388e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

5. Remove the air baffle (on page 22). 6. Remove the PCI riser cages (on page 23). 7. Connect the two-port SATA cable: a. Connect the cable to the drive sideband signal connector. b. Secure the cable in the cable clip. c. Connect the cable to the SATA storage and optical drive connectors. d. Route the cable along the side of the system board towards the front chassis, and then connect the cable to the drive backplane. o LFF drive o SFF drive 8. Connect the rest of the drive cables required in this drive configuration. For more information, see "Storage cabling (on page 82)." 9. Install the PCI riser cages (on page 24). 10. Install the air baffle (on page 22). 11. Install the access panel (on page 21). Hardware options installation 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Hardware options installation 44
5.
Remove the air baffle (on page
22
).
6.
Remove the PCI riser cages (on page
23
).
7.
Connect the two-port SATA cable:
a.
Connect the cable to the drive sideband signal connector.
b.
Secure the cable in the cable clip.
c.
Connect the cable to the SATA storage and optical drive connectors.
d.
Route the cable along the side of the system board towards the front chassis, and then connect the
cable to the drive backplane.
o
LFF drive
o
SFF drive
8.
Connect the rest of the drive cables required in this drive configuration. For more information, see
"Storage cabling (on page
82
)."
9.
Install the PCI riser cages (on page
24
).
10.
Install the air baffle (on page
22
).
11.
Install the access panel (on page
21
).