HP T5145 TeemTalk 7.0 User Manual - Page 105

Programming the Function Keys & Buttons VT Series Emulations To program the function keys and buttons, hold down a Shift key and press any F1 - F8 key. The Program Function Keys menu will be displayed. Each line relates to one particular function key and its button. The two fields following the f-key number allow you to enter a two line label of up to sixteen characters for the equivalent button on the display. These are followed by the definition line which contains an escape sequence by default. Each definition can contain up to 50 ASCII characters. To program an f-key, press the F1 key to move the cursor to the relevant line and use the cursor keys to move from one section of the line to another. You must press the F1 key to end each definition line entry so that extra space characters are not sent to the host. Note that using the cursor keys to move to the next line will cause the remainder of the definition line to be sent as spaces. When you have finished defining the f-keys, press F7 to save the definitions and exit from the menu. If you want to exit without saving the settings, press F8. AT&T 4410 Emulation 89