HP T5145 TeemTalk 7.0 User Manual - Page 97

Creating a VT Series Emulation Session VT Series Emulations You can create a session either using the TeemTalk Session Wizard or while TeemTalk is running. Using the TeemTalk Session Wizard This section describes how to use the TeemTalk Session Wizard to create an VT Series emulation session. 1 To run the TeemTalk Session Wizard from the Start menu, select All Programs > HP > HP TeemTalk Terminal Emulator > Session Wizard. 2 In the Session Name field, enter a unique name that will identify this session configuration for future selection. 3 Select the Transport method then click the Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings. 5 Select VT Series in the Emulation list box then click the Configure button to specify settings. (The options are described in the section "Setup Options" on page 90.) 6 Click Next to display the Advanced Options dialog. 7 Click Next to display the Finalization dialog. 8 If you want a shortcut icon for this session to be created on the desktop, check the box labelled Create icon on desktop for session. 9 Click OK to create the session and exit. 10 To run the session, either double-click on the desktop icon if one was created for the session, or run TeemTalk, display the File menu and select Open Session. Select the name of the required .tts session file then click Open. Creating a VT Series Emulation Session 81