HP T5145 TeemTalk 7.0 User Manual - Page 222

IBM 5250 Display Emulation The status line will display R**** F* where R indicates you are in Record mode, **** is the number of keystrokes that may be stored, and F* is the number of the Fn key pressed. Note: If you press a pre-recorded Fn key, its contents will be replaced with the following keystrokes. You can also remove the contents of the Fn key before recording by pressing the Delete key. 3 Enter the keystrokes to be recorded. You may pause recording at any time to allow keystrokes to be entered manually when played back by pressing Pause. Pause mode is indicated by the following symbols on the status line. To continue recording, press Pause again. Playback Keystrokes Note: You can cancel the newly recorded keystrokes by pressing the Quit key. This cancellation does not affect the previously recorded keystrokes. 4 To finish and save the recording, press the Record key. 1 Position the text cursor where the playback is to start. 2 Press the Play key to enter Play mode. The status line will display PLAY and a series of boxes representing the Fn keys. A solid box indicates that the Fn key in that position is currently storing recorded keystrokes. 3 Press the Fn key storing the recorded data to play back. Playback will begin immediately, as indicated by a P on the status line. All the recorded keystrokes will be played back automatically. When playback is completed the P will disappear. 206 Record & Playback Keystrokes Facility