HP T5145 TeemTalk 7.0 User Manual - Page 51

Host Connection sensitive, so make sure your Text entries follow the correct conventions for your system. Note: When running the IBM 3270 or IBM 5250 emulation, Text entries are only applicable in NVT mode. 3 Enter the response required in the Respond With box. In order for a text entry to be sent to the host it must be followed by a carriage return command. This is specified by selecting C. Return in the list of predefined commands in the list box below then clicking the Insert button. A will appear in the Respond With box. You can also enter a predefined key function in the Respond With box by selecting Key Definition in the list of predefined commands in the list box below, selecting one of the virtual key names listed in the box below that, then clicking the Insert button. The list of predefined commands that can be inserted include UserName (indicated by ) and Password (indicated by ). Selecting either of these will cause a dialog box to popup when logging on to the host prompting the user to enter a name or password, respectively. You can also delay the script response by 2 seconds by inserting Delay (2s) (indicated by ) or 0.255 seconds by inserting Pause (0.255) (indicated by ). 4 When you have finished specifying the response to a particular prompt, click the Add button to add the definition to the Script window on the right. The script will perform the actions in the order displayed in the Script window. To change the order of the script lines, use the up and down arrow buttons to the right of the Script window. 5 Repeat this procedure for each prompt as required. Auto Logon 35